Barcelona is located 92 kilometers south and due to its proximity is considered as an alternative Airport to Barcelona-El Prat. Ryanair is one of the airlines that operates most services from Girona Airport. See more information. Taxi: Get within 20 minutes to Girona city centre. Barcelona is one hour from the Airport by taxi. Car Hire: Hiring a car in Girona Airport is a good option to move around. The airport has one terminal with two floors.

On the ground floor Floor 0 you will find the check-in desks and Arrivals hall. The Departures hall, security check and boarding gates are located on the first floor Floor 1. TIP: Many well-known museums, sights and attractions require online reservations. A good alternative for flying to or from Girona Airport are the following airports, sorted by distance from the airport. You can also take a look at the complete list of airports in Spain. The distance from Girona Airport to the centre of Girona is 14 kilometres.

By car, it takes 15 minutes to get to the centre of Girona. Travel by car. Unfortunately, there are no public transport possibilities at this airport. Check out our transportation page for other ways to travel from the airport to the city.

You can also choose for an airport express bus service at Girona Airport. Learn more about your travel options, travel time and where to buy tickets. Bus services. A taxi is the quickest and most comfortable way to get to and from Girona Airport. Book your taxi at Girona Airport and discover the comfort of pre-booked taxis.

Book a taxi. It is most convenient to find and book a car well in advance. By doing so, you can save money and time at the airport.

Rent a car. Girona Airport offers various official parking options, from premium to low cost. In addition, alternative parking options are available near the airport. If you want to park as cheaply as possible, it's wise to book online! Book your parking space.

Do you want more information about facilities, currency exchange, services, free Wi-Fi, lounges, etc. Check our at the airport page for a complete overview of all facilities and services at Girona Airport. Find the latest flight status information for flights departing from and arriving at Girona Airport. Looking for a cheap flight? The Journey time from Girona to Barcelona city centre is approximately 1 hour 10 minutes.

Important: Also be aware that there are 2 different Barcelona Buses which are both operated by the same company. Make sure to catch the right bus. One bus leaves Girona Airport and goes directly to Barcelona and vice versa the other bus only leaves from Girona centre and goes to Barcelona and vice versa make sure you're catching the right Barcelona Bus.

Please Note: the following link will take you to a page that will have a link to a timetable provided by Barcelona Bus. This information is not provided by barcelona-tourist-guide.

We do not monitor or maintain the accuracy of timetable information provided by external companies like Barcelona Bus and it is your responsibility to check the accuracy of this information. Further information and timetables for the Barcelona bus. You can also call the Barcelona Bus information line - they have an operator that speaks English :. To look up timetable information for the train transfer between Barcelona city centre and Girona click on the following link which will take you to the RENFE train site.

Timetable of the train from Barcelona Sants to Girona. The journey time to Girona from Barcelona is approximately 1 hr and 10 minutes and you will be dropped off in Girona city centre. From Girona city centre you need to make your way to Girona airport.

Remember to account for an extra half an hour for the journey from Girona Centre to Girona airport.

Once you have entered the number, the calculator displays the results. Once you have taken note of the numbers, click the reset button if you want to make other conversions. We used mm as the example because that is the focus of this page.

However, you can use the same method for other mm values. If you want to convert 20 mm for example, you just type 20 in the millimeter field. Millimeters Definition — The millimeter is a measuring unit for small objects. It belongs to the metric system and is equivalent to 0. It is abbreviated as mm. A millimeter is equal to roughly 0. A mm is smaller than a centimeter, as 1 mm is equal to 0.

Inches Definition — For Americans, the inch is the preferred unit of measurement. The inch is derived from ynce or ince, which comes from uncia. The inch has two abbreviations, in.

In Japan, the inch is used to measure display screens. The official symbol of the inch is in. A mm to inch calculator is nice, but if you need a series of conversions right away, this conversion chart will do. For example, You can use it for calculate the mm inch equivalent. If you want to convert mm to inches, you use the same technique for standard mm to inch conversion. All you have to do is divide by Keep in mind that 1 inch is equivalent to So, it follows that you just need to divide mm using that number.

Using that formula, we get Doing the conversion from mm to inches is not that difficult. If you have a converter or calculator, the process is straightforward. As we have pointed out, there will be a lot of instances where you have to make this conversion, so knowing the process will help.

If you are familiar with only inches, knowledge will be necessary. For instance, you may find a device that is mm thick. That is why you need a chart or calculator to make the conversion. This site is not a news organization and is updated without any periodicity, solely on the basis of availability of material, so is not an editorial product subject to discipline in art. Dlg 70 and The site is managed and coordinated by the author only for informational and educational purposes.

While considering the reliable sources used, the author of this site does not guarantee the accuracy and integrity of information and therefore accepts no responsibility for any problems or damage caused by errors or omissions, if such errors or omissions result from negligence , accident or other cause. All notes, quotes the texts and images are property of their respective authors and production companies that own the rights, if the beneficiaries were considered damaged by the inclusion of these files on this site or had been inadvertently inserted images, information, text or other copyrighted material will be immediately removed and or it will be referred to the source from simple message to the e-mail address indicated on the contact page.

The mission of this site is the progress of science and useful arts, as we think they are very important for our country's social and cultural benefits of the free sharing of information. All information and images on this site are used here only for educational purposes, cognitive and informative.

The medicine and health information contained on this site is general in nature and informative purposes only and therefore can not replace in any case the advice of a doctor or a legally authorized person to the profession.

But there are still nagging questions about how long protection from the coronavirus vaccines will last. For instance, will your shot wear off gradually or suddenly? Will you need a booster? Vaccine longevity became a hot topic in August, when some studies began to suggest vaccine effectiveness was waning, although data also showed the vaccines were still highly effective against hospitalization.

Pfizer and Moderna have been monitoring immunity in people who were given their vaccines in the initial clinical trials—both companies had reported strong overall efficacy at the six-month mark. Pfizer reported on its efficacy in a preprint that has not been reviewed by outside scientists; Moderna released a company statement. A report in The New England Journal of Medicine NEJM in April showed that 33 participants who had received the Moderna vaccine during the Phase I trial had a gradual decline in antibody protection—and, based on the slope, Iwasaki says, that is hopeful news.

It should be noted that the trial occurred prior to Delta becoming the predominant virus variant. Reducing rates of infection should help break the cycle of viral transmission, which would ultimately result in fewer cases of severe COVID and death.

And according to Fyodor Kondrashov, an evolutionary geneticist at the Institute of Science and Technology Austria in Klosterneuburg, it should also help keep the emergence of vaccine-resistant variants at bay. Getting more people vaccinated is the single most effective intervention to keep transmission rates low, but any bump in vaccine effectiveness can help as well.

So far, no human vaccine has been completely undermined by resistance in the way that many anti-infective drugs have, says Andrew Read, who studies the evolution of infectious diseases at Pennsylvania State University in University Park.

The Delta variant took the world by surprise. Evolution — and our immunological responses — could have more surprises in store. COVID boosters for wealthy nations spark outrage. But any discussion around the need for boosters cannot be had in a vacuum. In addition to considerations of immune kinetics among the immunized, there are also issues of vaccine equity and availability to factor in.

And as long as vaccinated people are staying out of hospitals and morgues, then to Katrina Lythgoe, an evolutionary epidemiologist at the University of Oxford, UK, theoretical arguments around vaccine resistance are secondary.

Khoury, D. Nature Med. PubMed Article Google Scholar. Naaber, P. Lancet Reg. Health Eur. Article Google Scholar. Thomas, S. Pegu, A. Science , — Goel, R. Turner, J. Nature , — Goldberg, Y.

Bar-On, Y. Chemaitelly, H. Puranik, A. Rella, S. Download references. Career Guide 10 NOV Here are some key facts and figures about the Moderna vaccine and how effective it is, according to the latest research.

The vaccine is currently recommended for anyone over 12 years old. Here are some key facts and figures about how effective the Pfizer-BioNTech vaccine is and how it works. In April , concerns about the vaccine causing blood clots caused a pause in distribution.

But, on April 23, , the FDA stated that the vaccine was still considered safe for most recipients and could continue being administered. This vaccine is widely approved for use in adults 18 and older, including in the European Union under the name Janssen.

In some countries, the vaccine is distributed under the name Vaxzevria. All vaccines currently approved for use in the United States and elsewhere have been shown to be safe and effective in studies. Most side effects of the vaccines are mild and resolve within a day or two.

Salt the hash: administrators should also randomize password hashes by adding a random string of letters and numbers called salt to the password itself. This string should be stored in a separate database and retrieved and added to the password before it's hashed. By salting the hash, users with the same password have different hashes. Two-factor authentication 2FA : additionally, administrators can require two-step authentication and install an intrusion detection system that detects brute force attacks.

This requires users to follow-up a login attempt with a second factor, like a physical USB key or fingerprint biometrics scan. Limit number of login re-tries: limiting the number of attempts also reduces susceptibility to brute-force attacks.

For example, allowing three attempts to enter the correct password before locking out the user for several minutes can cause significant delays and cause hackers to move on to easier targets.

Account lockdown after excessive login attempts: if a hacker can endlessly keep retrying passwords even after a temporary lockout, they can return to try again. Locking the account and requiring the user to contact IT for an unlock will deter this activity. Short lockout timers are more convenient for users, but convenience can be a vulnerability. To balance this, you might consider using the long-term lockdown if there are excessive failed logins after the short one.

Once a login fails, a timer can deny login until a short amount of time has passed. This will leave lag-time for your real-time monitoring team to spot and work on stopping this threat. Some hackers might stop trying if the wait is not worth it. Regardless of what you use, you can use this before the first login and after each failed attempt to protect further. Use an IP denylist to block known attackers.

Be sure that this list is constantly updated by those who manage it. Password education: user behavior is essential to password security.

Educate users on safe practices and tools to help them keep track of their passwords. Since users tend to compromise their safety for the sake of convenience, be sure to help them put convenient tools in their hands that will keep them safe. Watch accounts in real-time for strange activity: Odd login locations, excessive login attempts etc.

Work to find trends in unusual activity and take measures to block any potential attackers in real-time. Look out for IP address blocks, account lockdown, and contact users to determine if account activity is legitimate if it looks suspicious. As a user, you can do a lot to support your protection in the digital world.

The best defense against password attacks is ensuring that your passwords are as strong as they can be. Brute force attacks rely on time to crack your password. So, your goal is to make sure your password slows down these attacks as much as possible, because if it takes too long for the breach to be worthwhile… most hackers will give up and move on. Here are a few ways you can strength passwords against brute attacks:.

Longer passwords with varied character types. When possible, users should choose character passwords that include symbols or numerals. Doing so creates Using a GPU processor that tries Although, a supercomputer could crack it within a few weeks. By this logic, including more characters makes your password even harder to solve.

Elaborate passphrases. Not all sites accept such long passwords, which means you should choose complex passphrases rather than single words. Dictionary attacks are built specifically for single word phrases and make a breach nearly effortless.

Passphrases — passwords composed of multiple words or segments — should be sprinkled with extra characters and special character types. Create rules for building your passwords. Other examples might include dropping vowels or using only the first two letters of each word. Stay away from frequently used passwords.

It's important to avoid the most common passwords and to change them frequently. Use unique passwords for every site you use. To avoid being a victim of credential stuffing, you should never reuse a password.

On a GPU, this would only take about 5 days. On a supercomputer, this would take 7. In the meantime, you can combine a couple of security measures.

It makes sense now. But computers are smart. There are ways to teach the machine to simulate human behavior. The authentication commonly comes in the form of a code sent to your mobile.

Just make sure not to lose your phone. They may even block your IP address. This will make brute-forcing even slower or entirely useless. Combine all of the above and you will be as safe as possible. Educating your personnel on the topic will also increase the chance of brute force attack prevention. Now you have the knowledge. Just in time. Really, John? The principle is very simple.

It guesses passwords using speed and calculations made by the computer. It depends on your password difficulty and other security features you might have. Brute force may take a second or thousands of years. Be sure to check the specific requirements before using any of the tools.

Brute force algorithm consists of checking all the positions in the text and whether an occurrence of the pattern starts there or not. After each attempt, it shifts the pattern by exactly one position to the right.

Theoretically yes, though it would take more than a billion years. AES has never been cracked yet and is it safe to say it will protect you against any brute force attacks. A secure password is long, and has letters, numbers, and symbols. Avoid dictionary words and common phrases.

Generally, a password which is easy for you to remember will be easy for others to hack. Discovering a password without previously knowing it. You use a computer to make calculations and try every possible combination until the password is revealed.

Depending on security measures, the process may take from seconds to thousands of years. A graduated journalist with a passion for football.

A horror writer with a black sense of humor. A poet with dark aesthetic. A cinephile with a preference for old movies. A singer filled with experimental vibes. And most of all, a scorpion with purple features. How To Drag Click. It could take anywhere from infinite time to a millennium to mere fractions of a millisecond. This tool works by cycling through a word list containing common words and passwords and then evaluating other factors such as character types.

If you enter a password not on the word list, the cracking time will not be affected. But if your password is on the word list, it greatly affects cracking time. Note: The interactive tool is for educational purposes only. Although it does not collect or store your passwords, you should avoid using your current password. When it comes to passwords, one thing is certain: Size matters. Adding a single character to a password boosts its security exponentially.

The list above shows the difference that adding characters can make when it comes to security. Nine-character passwords take five days to break, character words take four months, and character passwords take 10 years. Combining numbers and letters rather than sticking with one type of character dramatically enhances password security.

A string of nine letters or numbers takes milliseconds to crack. Add a single letter, and your password may become cryptic enough to thwart password crackers for nearly four decades. Password attacking methods actually take advantage of those common habits. Your best bet is to simply make your password less predictable and more complicated.

Combining several types of characters is an extremely effective way to make your password more cryptic. A simple, common word can be cracked in fractions of a millisecond.

Admissions and Tuition Section Overview. Our programs have a wide range of admissions requirements, application processes, costs, benefits and financial aid options. Find your program to see the most relevant information. Campus and Community Section Overview. Recreational therapists, or therapeutic recreation specialists, use creative healing methods to help people with illnesses or disabilities become active again.

They use arts and crafts, animals, sports, games, dance and movement, drama, music, and community outings to help patients maintain or improve their physical or mental health.

Recreational therapists work with doctors, nurses , psychologists, social workers , physical therapists , and occupational therapists to care for patients of all ages, from infants to the elderly. Therapists provide different services for patients depending on where they work. They may use structured group activities or work individually with patients to develop physical or social skills through exercise, mental stimulation, creativity, and fun.

Assessing their patients: Most recreational therapists begin therapy with a new patient by evaluating the patients' physical, mental or emotional health and determining their needs. Creating treatment plans: Recreational therapists make custom treatment plans for their patients to best serve each person's individual needs. Providing interventions: Depending on the patients' needs, some require interventions or modifications to traditional therapeutic practices for full engagement.

Recreational therapists help develop and implement these interventions. Engaging with their patients: During therapy sessions, most recreational therapists engage directly with their clients and help them perform the therapy. Helping set goals: Many recreational therapists help their patients set goals for their therapy and establish action steps to reach those objectives.

Establishing coping strategies: Some patients need help developing effective coping strategies, so recreational therapists help their patients identify and implement strategies.

Documenting patient progress: An important duty for recreational therapists is maintaining thorough records of their patients' progress. Collaborating with others: Some recreational therapists work with other healthcare professionals to ensure they're meeting their patients' healthcare needs. How to become a recreational therapist. Complete your high school education. Earn a bachelor's degree. Seek an internship.

Gain certification. Think about specialization. Develop your professional network. Consider graduate school. Salary and job outlook for recreational therapists. Location: Typically, recreational therapists who work in high cost-of-living areas like large urban centers earn more than those who live in more rural and less expensive regions.

Often these therapies can help veterans to most effectively reintegrate into civilian society. Overall, the facilities employing the greatest number of Recreational Therapists include hospitals, nursing care facilities, the government, social assistance programs and ambulatory healthcare services.

The state with the highest employment in this occupation is New York, followed by California, Pennsylvania, Illinois and Texas. Good news! There exists strong earning potential in a career as a Recreational Therapist. Furthermore, the top paying employers within this occupation are the government, hospitals, ambulatory healthcare services, social assistance programs and nursing care facilities.

The organization seeks to promote a world where all people have access to recreational therapy through research-based interventions to promote successful outcomes. All statistics are provided by the Bureau of Labor Statistics.

What is the single biggest suggestion you would give to someone wanting to get into this career? There is a state and a national exam, and some individuals choose to take the state exam and realize they want to move somewhere else in the country.

They would not be allowed to practice somewhere else in this case because they are not nationally certified. However, this is not the case. If you could describe in one word what makes you successful, what would it be? Recreational Therapist.

Radiation Therapist. Dental Hygienist. Pharmacy Technician. Physical Therapy Assistant. Veterinary Technician. Medical Assistant. Surgical Technologist. Occupational Therapy Assistant. Certified Nursing Assistant. Emergency Medical Technician. Dental Assistant. Respiratory Therapist. Cardiovascular Technologist.

Certification is not mandatory for recreational therapy jobs, but it is generally acknowledged that employers prefer candidates who have obtained certification from the National Council for Therapeutic Recreation Certification. This credential is awarded to recreational therapists who have passed a written exam and completed a supervised internship of at least hours. Skip to content.

Does anyone have an idea of how can can hide cable and wifi wires? How far up should backsplash go? I guess I was just thinking of the standard wire that you use inside your home, put in a pipe in a trench since we will have one anyway for water run from the house to the barn, and would it work ' ft away. I guess I should see whether what is available for me to buy is the same as what the telephone company would use outdoors. Using standard CAT 5 underground in conduit is not a good idea due to the conditions it will be subjected to.

Interior CAT 5 is not rated for wet locations. Conduit in the ground will always have water in it no matter what you do. Underground you should use a gel filled cable that is available through your local electrical supply house.

The cable you want is CMX rated, any Category. The CMX is the important part - that indicates that the cable is made for outdoor conditions. CMX is good stuff, I don't see any need for gel-filled for only a foot inside plant run. That stuff is a PAIN to work with.

I am in the process of installing an automatic gate with telephone entry and I had the exact same question. My entry box manual says that I can run up to feet with 24 guage wire - telephone wire guage. I used a Cat 5 cable rated for direct burial.

Some direct burial cable is gel-filled, some isn't. I prefer the non-gel kind, and completely forgot that you can get non-direct-burial CMX too.. Here is a link that might be useful: direct-burial non-gel Cat5e I think this is UV too but confirm before ordering. Indem Sie weiterhin auf der Website surfen bzw. Mehr erfahren. Ultimate Lighting Sale.

Bathroom Vanity Sale. Bestselling Chandeliers and Pendants. Sign In. Join as a Pro. Houzz TV. Houzz Research. Shop Featured Holiday Categories. Home Decor. Holiday Decor. Christmas Trees. Holiday Lighting. Gift Cards. Electrical Wiring. Telephone Wire - how far can you run it? Email Save Comment Sort by: Oldest. Newest Oldest. Like Save. Related Discussions How far would you continue backsplash?

You don't have a good stoping point from right to left or up. Anything you try to do isn't going to look good. My advice is don't put in a backsplash. A BS can look fantastic or like an afterthought. Yours will be the latter. Sorry, I know they're very popular now. Do the chalkboard on the large wall and hang it just 5 inches above the back of your seat. Better insulation, both electromagnestic and water resistance, were required. Early telephone cables relied upon the technology used in the manufacture of telegraph cables.

Gutta percha and various rubber compounds were used for insulating and water proofing the telegraph and early telephone cables. Telephone cables were employed for aerial, underwater and underground use around Early cables were single grounded wires followed by metallic circuits lines after their development.

By all of the newly manufactured cables were metallic circuit cables. There were numerous cable manufacturers. The cables made by the different manufacturers were very similar but not identical. The cables contained up to copper wires. They were insulated with cotton, cotton impregnated with paraffin, gutta percha or a rubber compound, and then in wrapped in lead. There was a large demand for telephone cables. Telephone cables were needed to replace the large number of aerial wires present in the cities.

In the 's the major telephone cable concerns were noise elimination, waterproofing and fitting more wires in each cable. The technique of wrapping the conducting wires in lead was developed to eliminate electromagnetic noise in the lines. Other insulating techniques, such as covering the insulated wires with tin foil and using additional insulating layers, were employed.

Techniques for impregnating the lead tubes after the conducting wires were drawn through with melted paraffin, resin, a mixture of paraffin and resin or high test illuminating oil were used to protect the insulation from moisture.

Then vitrified clay conduits were developed. The multiple duct vitrified clay conduit became the main type of underground construction used. A separate square hole was provided for each cable, and when more ducts were required sections of conduit could be added. The general complaints of the poor voice transmission over the telephone cables, unrecognizable voices, and muffled and hollow sounds were still present.

There were two major improvements made to telephone cable in the late 's. The first was the issuance of a specification for a standard type of telephone cable in The specification outlined a metallic circuit or twisted pair cable. The spaces in the core and between the core and the pipe were filled with an insulating material.

A two inch diameter cable could contain up to 52 pairs of wires. The second improvement was the development of paper insulated dry core cable. The dry core cables were successful because the lead tin alloy sheathing now provided adequate water proofing. By dry core, paper insulated cable was the standard.

The size of the conductor and the electrostatic capacity requirement were further reduced and greatly decreased the noise in the lines. Improvements were continually being made to telephone cable, the use of more and finer conductors in a given cable, lower electrostatic capacity requirements and a larger air to paper ratio of the insulation. Some of the cable improvements were made possible because of the improvements made in other areas of telephony such as transmitters, receivers, coils and switchboard circuits.

The next major step was loading of the telephone lines. Loading the telephone cables increased transmission efficiencies. This material was more economical than the lead tin alloy pipes, it had good tensile strength, corrosion resistance, and the mechanical properties necessary for aerial and underground cables.

Another improvement was the invention of the repeater, which amplified voice signals. Carrier systems or multiplexing enabled a single pair of wires to be used for multiple calls. The end of the 19th and the beginning of the 20th centuries were a time of change and rapid expansion in the telephone industry. The telephone went from being a novelty item that only a few could afford, to what most consider a necessity today.

This post should help in answering that question for you. Teachers in the United States qualify for FMLA, 12 weeks of unpaid leave over 12 months to care for a newborn or newly adopted child. With no federal paid family medical leave laws in place, Paid maternal leave varies on a state by state basis, and leave for teachers is often not included in those laws.

Many cities and school districts have their own separate programs that fund maternity leave for teachers. Still, those laws do not always fully apply to teachers. California has a very generous pregnancy disability and paid family leave law that applies to most large employers. However, California teachers are exempt from paying into state disability insurance and cannot benefit from the program. New Jersey teachers ARE included in this law as long as their school has more than 49 employees.

Rhode Island offers up to 13 weeks of paid time off for childbirth and bonding but has special rules for teachers in public schools. These rules typically apply to cases where a teacher requests leave during an already established break, such as summer and winter sessions.

Teachers in Washington can take 12 weeks of paid maternity leave as long as the school employs at least 50 people, and their district does not already have a separate paid maternity leave program. Some school districts and cities have their own agenda that provides maternity leave specific for teachers. New York City recently passed a law allowing teachers to take 6 weeks at full salary to teachers after the birth of a child in addition to any sick time up to 12 weeks.

Massachusetts will be offering paid maternity leave for up to 8 weeks for teachers and other employees starting in January of In Connecticut, teachers do not fall within the requirements for paid family medical leave newly adopted by the state. Late applications may result in a delay with the payment of maternity benefit.

If you are ineligible for maternity benefit. This may be the case for teachers returning from career break, or those who are just at the start of their career. The Department of Education and Skills have made provision for these circumstances see part In these circumstances, the teacher should notify Department payroll of their ineligibility, providing written confirmation from the Department of Social Protection, to ensure that their salary deductions are correct while on maternity leave.

The arrangements can be summarised as follows:. In practical terms, the Department has stated that leave in lieu is the absolute minimum in line with the requirements of the Organisation of Working Time Act. The small number of days in lieu if any that may accrue to a teacher under these revised arrangements must be taken immediately prior to the commencement of maternity leave, as they are effectively lost if carried forward to the next leave year.

If a pregnant teacher does have an entitlement to additional annual leave, this is separate to her maternity leave, and will not affect the dates submitted to the DEASP or recorded on the OLCS.

This leave is substitutable, but the school will have to make contact with payroll to arrange payment of the substitute. Pregnant teachers are entitled to paid leave with substitute cover to attend any medical appointments related to their pregnancy. Pregnant teachers are entitled to paid leave with substitute cover to attend one full set of antenatal classes in a working career, and the final three classes in a set for any subsequent pregnancies.

However, there is a provision in place whereby when sick leave is later exhausted, by reaching the day threshold, a teacher may extend her sick leave by the number of pregnancy related days recorded, at half pay.

As such, it is important that schools correctly record pregnancy related sick leave on the OLCS. For example, if a teacher had 50 days of pregnancy related sick leave, these days will be part of her normal sick leave record. But, within the same four year period, if she subsequently fell ill with an unrelated condition, and reached the day limit, rather than moving onto Temporary Rehabilitation Remuneration TRR , she would have access to an additional 50 days at half pay, in light of the earlier pregnancy related condition.

There is also a protection in place where a woman will not drop below half-pay if a condition is pregnancy related, regardless of the number of days taken. If a teacher has a stillbirth or miscarriage any time after the twenty-fourth week of her pregnancy, or where her child has a birth weight of at least grammes, she will still be entitled to 26 weeks of paid maternity leave followed by up to sixteen weeks of unpaid maternity leave. She will still apply to the Department of Social Protection for her Maternity Benefit following a stillbirth.

Health and safety leave may be granted if the conditions in a workplace present a risk to a pregnant teacher or her developing baby. This may include contagious illnesses to which the employee is not immune. If this does not remove the risk. Applications for health and safety leave are generally made as soon as the risk is identified, but may necessitate a period of sick leave while the health and safety leave application is assessed.

If a teacher is absent for more than twenty-one days on health and safety leave, she must claim Health and Safety Benefit from the Department of Social Protection. This benefit is paid directly to the teacher, with the value of it deducted from her fortnightly salary. It is also at the authority's discretion for community and voluntary controlled schools; the governance board in a foundation or VA school, whether they reclaim some or all of these payments. A1: A teacher must return to work as a teacher within the maintained school she worked at prior to the maternity leave and is entitled to return on the same terms and conditions.

A2: A teacher has the right to return to her job in the school on the same terms and conditions. This is a right to return to a full time contract if the teacher was originally employed on a full time contract. A3: If a teacher returns to work as a teacher in a different school, even if this is the same employer, e. Payments made by way of SMP are not refundable. More detailed guidance for employers on handling a request to work flexibly can be found on the ACAS website.

A2: A teacher returning on reduced hours, must work the equivalent of 13 weeks at their previous hours to be eligible to retain the 12 weeks half OMP, i. A1: Supply teachers, engaged via an external recruitment agency, are not entitled to OMP as they are not employees. A2: The Maternity Scheme for Teachers is at section 5 of the Burgundy Book and therefore, teachers falling within category a of paragraph 1.

A4: All employed teachers that meet the qualifying criteria for maternity leave and pay as set out by legislation and in the Burgundy Book will be entitled to OMP. If a teacher returns from maternity leave early, the teacher covering her post will be entitled to the notice period specified in their contract.

This may be the notice provisions contained within the Burgundy Book or a different notice period specifically provided for in that contract. Schools should take advice from their HR providers on suitable wording for such contracts. As a result of case law in Gomez, a teacher must be able to take her annual leave at a time separate to her maternity leave. Very often the 28 days entitlement will have been met during school closure periods either before or after her period of maternity leave.

A2: The appropriate LGA contact for queries is schoolteachers local. There will therefore be a period of service during the first appraisal year before maternity leave starts.

This period can be used to assess performance for that appraisal year, taking into account any issues which may have arisen due to the pregnancy. A2: The appraisal can be conducted before maternity leave commences to ensure that all issues are fresh in the minds of the parties involved and the pay review can be implemented, if appropriate, at the usual time.

A3: Equally, on return from maternity leave, there would usually be sufficient time left in the appraisal year for an assessment to be carried out for that appraisal year. Targets, where appropriate, would need to be adjusted to take account of the shorter time frame involved. A4: In some circumstances, the maternity leave may overlap an appraisal year to a significant extent meaning that there is a very limited period, if any to assess performance for that year.

However, if that previous performance review had highlighted areas that needed improvement, with the result that the teacher would not receive a pay increase, it may be fairer to give the teacher a period of time on return from maternity leave to demonstrate that she has improved her performance since the last review before determining her entitlement to a pay rise. If a pay rise is awarded this would then be backdated.

A1: Assessing performance in the context of absence may create some difficulties for the appraisal process. All decisions on pay progression for all staff must be evidence based.

They allow the cable to turn with the animal as it rolls and fights, which means less kinking. If you want to live catch anything a swivel is a must.

Step 4: Snare Lock — All snares must have some sort of locking mechanism to work. Whether it is a bent washer lock, mechanical lock, or a knot in the cable, a lock is what closes down on the snared animal and holds it there. Relaxing Lock: A relaxing lock will close down on the animal when they walk through the snare and are pulling on the cable, but it will release the pressure off the cable once the animal stops pulling. Relaxing locks tend to be less aggressive, but some newer locks, like the Micro Lock, are just as aggressive as the non-relaxing locks.

A relaxing lock should be used if you are trying to live catch an animal, and they greatly reduce fun damage commonly caused by non-relaxing locks. Non-Relaxing Locks: A non-relaxing lock is designed to hold its position on the cable. When an animal is pulling and fighting the snare, the non-relaxing lock will get tighter and tighter, and when the animal stops pulling the lock bites into the cable and holds its position tight around the animal.

These are great in dispatch sets, and entanglement situations. Mechanical Locks: These locks are a non-relaxing lock with moving parts. They are very aggressive, fast, and non forgiving, but you can easily release them off an animal once they are dispatched, etc. Step 5: Support Collar — The support collar is the device that attaches your snare to the support wire.

The wire can then be adjusted to the proper height and position in the trail. Twist-On Support Collar: All our snares feature this support collar.

To attach to your support wire, twist the collar with a left hand thread. If you are holding the wire in your left hand and the collar in your right hand, twist the top of the collar toward your body.

Wammy Support Collar: These are the old style of support collar. They are specific to cable size and wire gauge. To attach to your support wire, simply plug the wire into the collar. Wammy Support Collars are a headache to keep separate when you are building snares, but on the snareline go on fast. Plastic Tubing: We do not offer plastic tubing on snares, but it is being used.

To attach to the support wire, simply slide the wire into the tubing. No Support Collar: You can opt to have no collar on your snares if you like. The deer stop allows a leg caught deer to pull its leg back through the snare, and allows you to re-set the snare. Live Catch Stop: A live catch stop is the same stop as a deer stop, it is just placed to make a bigger loop on the snare. Most fox will be able to escape from a snare with a live catch coyote stop; because the loop is too big and they can pull their head back through the loop.

These S-Hooks are designed to complete the loop, between the lock and the cable, when they breakaway they straighten out releasing the loop and allowing the caught cow or deer go. These J-Hooks are designed to complete the loop, between the lock and the cable, when they breakaway they straighten out releasing the loop and allowing the caught cow or deer go.

J-Hooks work best with washer locks and Micro Locks, because of how they lay on the cable. Release Ferrule: A release ferrule is a small stop placed behind the lock on the cable. When the animal pulls with more force than the ferrules are rated for, the stop will pop off and release the loop and the animal.

To properly use release ferrules you must have the appropriate swag tool and compress the tool completely. If you do not follow directions with release ferrules the breakaway poundage might end up way lower or higher than what they are actually rated for.

They started when guys would drill or cut out locks for homemade breakaways, and now are tested and made by a manufacture. Step 8: Dispatch Spring — A dispatch spring is made to apply extra pressure on the lock. They are not legal in all states, so be familar with your state's regulations.

These work the best in entanglement situations. Regular Dispatch Spring: These come in either 25 or 50 which is a measure of how much pressure is applied on the lock.

The spring is placed behind the lock on the cable. It is placed behind the lock on the cable. It was made famous by Marty Senneker, from Canada. For most small animals, snare wires like these will do the trick nicely.

They are. Small game requires a specific gauge to prevent them from escaping or seeing the wire. You need to be able to hide it in their natural environment, so stick with a wire gauge between. The higher the number. Working with extremely thin wire can be a challenge for people who have big hands and fingers.

The good news is that some wires are bound and wound together to make it easier to handle. Remember that the length of the wire is also important. Keep in mind that some of the wires, including the best one below, have special attachments that preset everything for you. Note: The smaller the animal, the smaller the gauge. For example, small rabbits can be caught with. Snare wires are made out of all sorts of materials, but the best three are copper, brass, and steel.

Regardless of which material you use, proper placement is crucial. Luckily, the stainless steel snare wire in the next section does all of the hard work for you. Having the right tool is half the battle. That being said, there are countless snares on the market, so how do you know which one to choose? These snare wires are what I recommend. This combination of lightweight, highly durable materials is just about as good as it gets. Rather than only getting one snare as you might in other packages, this one comes with several.

Each snare should be at least 48 inches long, making them useful for all sorts of projects. Nonetheless, having a multi-pack of them stored in your survival kit is a great way to ensure your food supply. One of the most convenient features is the quick-loading wire. The result is a nearly instant wire pull that drastically increases the chances of you catching the prey.

As the loop closes, it slides along the plastic rather than dragging and chipping away at the steel. As you can see, there are numerous reasons why so many people choose these snare wires.

You can throw them in your bug out bag or start hunting with them right away. Rather than buying the first product that you see, you should keep an eye out for the different factors mentioned below. My recommended snares meet all of the criteria above.

Having a good set of wire snares are great for emergency or hunting kits because they keep you prepared for a variety of circumstances. Snares designed to capture furbearers by the neck or leg are set directly in the center of the animal's movement path. Snares usually are held in an animal's movement path with one of several different support systems.

One support that works particularly well can be constructed from a inch piece of gauge galvanized or 9-gauge soft wire. A "V" bend is made in the support wire about 4 inches from the end and driven into the ground with a notched rod to prevent the support from moving in the wind.

The snare is wrapped around the support about three times and held in place by a "U" configuration formed in the upper end of the snare support. Bend the snare cable upward slightly, just inside the lock, so the snare loop is not closed by the wind see Figure 1.

Attach snares to a solid object so captured animals cannot escape. Attach snares to the rebar with a strong swivel to prevent tangling and breaking. Use a lead cable that is at least as strong as the snare cable to attach short snares to the rebar stake. Avoid using 9-gauge wire or several strands of gauge wire to anchor snares to a rebar stake because they may bend back and forth, crystallize, and break.

When used for beaver, snares also can be secured to a tree that is at least 6 inches in diameter or to the base of a large shrub such as a willow. Snares set in holes under woven wire fences should be held in place about 1 to 2 inches from the fence with the snare support system described in Figure 1. The top of the snare can be as high as 3 inches above the bottom wire of the fence.

Set the snare far enough away from the fence to prevent the lock from catching on the bottom wire of the fence. The bottom of the loop should be about 2 inches above the bottom of the hole or coyotes and foxes may be caught by a front leg. With either of the above snare support systems, anchor the snares to the heavy-gauge wire on the bottom of the fence.

The upper wires on a woven wire fence usually are too weak to secure a snare. Snares occasionally are placed in the field but left unset for one to two weeks. This placement allows trappers to quickly set snares when pelts become prime and reduces human scent at the site.

Snares usually are set in the form of a round or oval loop. A round loop that is 12 inches in diameter can form an oval loop that is about 14 inches high and 10 inches wide. The following round loop diameters and heights above ground are recommended when snaring furbearers Table 1. Table 1. Animals usually follow the easiest route through heavy cover. These routes, which generally consist of trails, are excellent locations to snare furbearers. Specific locations to set snares for individual species follow.

Beaver Trails to uplands--place in water or on land along the route. Trails over dams--set on top or bottom side of water. Narrow creek passages. Den entrances: Construct a 2- to 3-inch high mound with mud and apply beaver castor. Make a V-shaped fence by placing old branches vertically in the mud. The center of the V should be open.

The V should point toward the mound and be located about 1 foot from the mound. Place the snare in the opening with the bottom of the snare about 2 inches below the water. Under ice at lodges and food caches. Coyotes and Red Foxes Trails leading to a carcass, bone pile, or pond. Trails in the bottom of ravines. Trails under fences.

Now that you understand how long you should pre-cleanse, what should you be doing as part of your pre-cleanse regimen? Here are a few suggestions:. Dehydration is commonly mistaken for hunger, so drink more water to keep your cells hydrated and eliminate false hunger. Drinking water is also an important first step in preparing for your juice cleanse because it transports nutrients to your cells.

For best results while cleansing, we want to bring your body into a more alkaline state. If you typically enjoy coffee or drink soda, take measures to wean off of these highly acidic, caffeinated beverages before your cleanse.

For coffee-lovers, if cutting coffee out of your diet is not a personal goal, it is not essential to completely eliminate it during your cleanse. As a solution, you may opt to drink a low-acid, cold-brew coffee, or transition to a matcha green tea as a way to still get a bit of caffeine without disrupting your alkalinity levels. Up your enzyme intake and start introducing more fruits and vegetables into your routine by including at least a few servings of raw fruits and vegetables into your diet now!

Try this green smoothie : simple, efficient, quick, no fuss. In the days before your Reset Cleanse begins, aim to eat a strictly plant-based diet… meaning no meat, no eggs, or dairy products. If you typically eat more than one serving of animal products per day, try to cut that down in the week before your cleanse. Animal products place a higher demand on your digestive system than plant-based foods do. The sooner that you can eliminate processed foods from your diet, the better.

Identify a cleanse program that best suits your needs and goals! Pick your perfect Reset: choose a day cleanse! Each day is comprised of 6-bottles of cold-pressed, organic goodness for maximum nutrition. Aim to eat more whole foods fruits, vegetables, whole grains, healthy proteins and fats and less added sugar as you add juice to your diet. Eat more of these science-backed best foods to eat for weight loss or try one of our meal plans to help you lose weight. Excited to start juicing?

EatingWell's 7-day juice plan is designed to be a starter kit with tips and recipes to help you get started or, if you're already a home-juicing enthusiast, to give you new ideas for your juicer. Here are tips for making your making your own healthy, fresh juice at home.

Our recipe ingredients are listed in this order. There are many types of juicers on the market, but they can all be classified into two main categories: high-speed a. High-speed juicers process fruits and vegetables at a higher speed through contact with a spinning shredder against a mesh filter, creating a "centrifuge" force. With nonejection types, the pulp remains in the shredder basket; with automatic-ejection types, the pulp is discarded into a separate waste basket.

High-speed juicers tend to be less expensive, however proponents of the raw food movement say the heat produced along with the high speed may break down some of the nutrients as the juice is extracted.

Low-speed juicers process fruits and vegetables at a lower speed, thereby producing less heat and noise and extracting more juice than high-speed juicers.

For leafy greens, such as spinach and kale, low-speed juicers are best. There are two types of low-speed juicers: horizontal and vertical. Horizontal and vertical low-speed juicers differ mainly in shape, with the vertical juicer being more compact and the horizontal juicer requiring more counter space. However, horizontal juicers have more versatility because they offer the ability to create homemade nut butters, pasta and baby food.

Low-speed juicers are more expensive, but ideal if you want to make juices that include a lot of leafy greens.

Then, add the remaining ingredients; blend until liquefied. Most of these claims are unsubstantiated and anecdotal rather than science-based, but there may be some positives to note from short-term juice fasting. Only one study to date has investigated the effects of a juice fast on health. This study looked at how a three-day fruit and vegetable juice fast affected the gut microbiota, weight loss , and body composition of 20 healthy people. During the fasting period, people drank six ounce bottles of juices that were a mixture of leafy green vegetables, roots, citrus, cayenne, and vanilla almond, totaling around 1, calories per day.

After the fast, people could then resume their normal diet for two weeks. The results showed that people lost a significant amount of weight during the juice fast, and that weight loss persisted over the following two weeks potentially due to changes in their gut microbiota. However, the weight loss may have resulted from lower calorie intake in general rather than from the juice specifically, and beneficial changes in people's gut microbiota may have been due to the overall increase of fruits and vegetables in the diet for those three days.

So basically, this study shows that a juice fast of this composition and calorie count for up to three days is safe and can be somewhat beneficial.

But those benefits can't necessarily be fully attributed to the juice itself. There are quite a few downsides to and side effects of juice fasting and cleansing, which is why many health professionals like dietitians and doctors don't recommend it—especially if a cleanse consists of fruit-only juices. If you want to juice fast despite the potential cons , what's the best way to do it? Here are some tips I'd recommend for before, during, and after your juice fast to minimize side effects and maximize benefits:.

Before you start a juice fast, take a moment to think about why you are doing this and set realistic expectations. Is it to lose weight? Curb sugar cravings? Reset your digestive system?

Whatever your goal is, a juice fast may be a step in helping to reach that goal depending on what your current eating habits are like , but it is not a fast track to wellness. Making sustained changes to your health and well-being takes time. Additionally, you'll want to think through when works best in your schedule to actually start a juice fast. My advice: Plan it for a low-key weekend at home, where you can run to the bathroom as often as you need to you will be peeing a lot!

Juice fasts require you to drink a lot of juice that is perishable, so it may not be best to juice fast when you're traveling either. During a juice fast, you should aim to drink at least six ounce servings of juice. That works out to one serving of juice every two hours from 8 a. You can also drink as much water and herbal tea as you want throughout the day. Adding one or two more servings per day is OK if you feel like you need more sustenance.

This amount of juice is necessary to get enough calories so you are still meeting or close to meeting your body's basic energy requirements. That means 13 out of 16 ounces or at least 1. For sample juice recipes, check out 11 of our favorite, easy-to-make juices. If you find yourself super hungry, consider including one serving of homemade cashew milk per day of your cleanse. You can also make one of your juices a smoothie instead or include a serving of celery and nut butter.

There's nothing wrong with adapting your juice fast to meet your needs. It would be a good idea to not participate in any strenuous physical activity think HIIT workouts during a juice fast, as you could become dizzy and fatigued more easily. The benefits of juice cleansing The positive side of juice cleansing is probably pretty obvious — you're consuming plenty of fruits and vegetables, which we know should make up half of our plate.

Juice cleansing comes with health risks In reality, juice cleansing isn't particularly healthy, and many juice cleansing companies actually downplay the health risks of restricting your diet to just juice. According to Beaver, there are major downsides to juice cleansing: The resulting nutrient deficiencies. Fruit and vegetable juice is almost completely devoid of protein, healthful fats and certain vitamins like B12 — all of which are vital to health.

Fiber is stripped out of fruits and vegetables during the juicing process. Fiber is important for 'feeding' the healthy bacteria in our gut — helping us feel full, keeping blood sugar from going up too quickly and preventing constipation. It causes undesirable side effects. The low calorie content of most juices can elicit fatigue, headaches, cravings and dizziness.

Expand the sub menu Video. Expand the sub menu What to Hear. Expand the sub menu Digital. Expand the sub menu Theater. Expand the sub menu VIP.

Expand the sub menu More Coverage. Expand the sub menu More Variety. Switch edition between U. Asia Global. People Linda Lavin. Rita Lyons Original. Dick Latessa. Ben Lyons Original. Michael Esper. Curtis Lyons Original. Kate Jennings Grant. Lisa Lyons Original. Brenda Pressley.

Nurse Original. View All Cast. Nicky Silver. Mark Brokaw. Allen Moyer. Scenic Design. Michael Krass. Costume Design. As an actor, he lets the characters speak through the page and tell him where they want to go. The play is centered on a funeral, but there are multiple intersecting storylines. That last character was closer to home to Lyons, who is gay. He also hopes that for Black audiences in particular, the play encourages them to have frank conversations with their own families.

Due to a long history of medical discrimination and abuse, many Black people are suspicious of therapy. Why do I need therapy? The play is about Black joy, but it is also about Black healing and Black release. And I think this play allows Black people to say, sometimes we are not OK, and we are broken, and we have gone through some nasty things.

But if we talk about them, we can heal through them and shine brighter on the outside. Another rule of show business: It takes some talent and a fair bit of luck. Last year, the pandemic shut down the play during its off-Broadway run as well as theaters nationwide. Then a year later, New York City allowed Broadway theaters to reopen. But many shows were unable to return, leaving a number of theaters empty.

And the shows that have filled those empty theaters have been penned by Black playwrights. This fall, eight Black playwrights are getting their work produced on Broadway, a record considering that the average theater season, on average, only features two works by Black creators and one of them is often August Wilson.

During a time when Broadway is reckoning with its own history of exclusion and lack of diversity, these creators are imagining a new kind of Broadway. And if these artists and their teams are successful, Broadway will start to look different, onstage as well as in the audience.

Lyons is not as worried about box office revenue as he is about the audience. Lately, Lyons has been thinking a lot about legacy. He started writing because of boredom. Then he realized that through writing, he could make a wider direct impact.

New South China Mall followed, with 7. Come one, come all. Step right up to a purely American curiosity. On the edge of acres going brown in the nation's smallest state is what its owner claims is the nation's smallest shopping mall. What time does potomac mills close?

Asked by: Flossie Nicolas. Is Potomac Mills outside? How many neighborhoods are in Potomac Mills Mall? What is the biggest mall in the world? What is the most popular mall in Virginia? What are the biggest malls in America? Is Fair Oaks open today? Come Visit the Farm. What time does the Southpark Mall open? How old is the Potomac River? What year was Potomac Mills mall built? Prince William County is currently vaccinating people in Phase 1a and 1b. Related News. Council votes to ban guns at Dumfries town office.

Loudoun Co. Anne Arundel students could get dismissed early on 3 upcoming days. Charles Co. Select date. Specific Dates Flexible Dates. How many nights? Remove Nights 1. Guest Count 1 Guest Count 1 2 3 4 5 6 7 8. Children Count 0 Children Count 0 1 2 3 4 5 6 7.

Child 1 : Age Required 0. Child Age 0 Shopping Line. Mall Security. Accessible Parking Handicapped accessible parking is available. Baby Changing Station Family restrooms are located throughout the mall; our brand new restrooms in the Neighborhood 1 Fashion District include a private lounge area for nursing mothers.

View on Map Children's Play Area Your health and safety is our priority, so per our Health Shopper Guidelines, this amenity or service is temporarily closed. Featuring an exclusive Commonwealth of Virginia theme, this indoor play area provides a variety of interactive play elements for young children and comfortable seating for parents!

Sponsored by Sentara Healthcare. For more information about Sentara Healthcare please visit www. View on Map Enhanced Cellular Connectivity This property features enhanced cellular connectivity that improves the signal strength and brings the cell phone tower inside of the mall. EV Electric Vehicle Charging Stations EV charging station, electric recharging point, charging point and EVSE Electric Vehicle Supply Equipment are an important part of supporting plug-in electric vehicles, including all-electric cars, neighborhood electric vehicles and plug-in hybrids.

View on Map Mall Walking Your health and safety is our priority, so per our Health Shopper Guidelines, this amenity or service is temporarily closed. Potomac Mills Milers; walking hours are am Monday-Friday. Register for free at the Mall Management Office! Please bring your drivers license or photo ID with you.

For more information about Sentara Healthcare please visit Sentara. Zipcar: A very cost-effective offering in the Washington, DC area is Zipcar, which allows you to get a car by the hour or by the day, with gas and insurance costs included.

There has been no official announcement from ABC yet. On November 8, , it was confirmed that Rademacher has been let go from the show.

Corporate raider Jasper "Jax" Jacks is born in Australia, though his family eventually moves to Alaska. As a young man, he marries Miranda Jacks, who appears to die in an explosion. Despite Lois' happy marriage to Ned Ashton , Jax pursues her romantically. To keep Jax occupied, Lois introduces him to her best friend Brenda Barrett who uses Jax to make her mobster ex-boyfriend Sonny Corinthos jealous.

Despite her love for Sonny, Brenda develops feelings for Jax, and the two eventually wed on his private yacht. When the two decide to renew their vows, Sonny interrupts the ceremony by bringing in Miranda, who revealed her death had been faked to hide scars she suffered in the explosion.

Jax ultimately decides to move on with Brenda, who has become engaged to Sonny. Brenda, who has been battling an addiction to pain killers, is left at the altar by Sonny in an attempt to protect her from the dangers of mafia life, and Jax helps her recover from her eventual breakdown.

The two become engaged yet again, though Brenda appears to die when her mentally unstable mother drives their car over a cliff. Jax learns that his father and brother Jerry Jacks started the family empire with mafia money, and they lost all of their money. After winning money in Monte Carlo, he begins to rebuild his fortune and also meets fashion designer Chloe Morgan. Chloe is in danger of losing her design company and must be happily married to retain the seed money her eccentric uncle left her.

Originally planning to marry a now divorced Ned in Las Vegas, Chloe's aunt Gertrude objects and Jax marries his best friend Alexis Davis to help cover the ruse. He reunites the sisters, though Chloe refuses his advances when she learns he left her to pursue Brenda. Stavros Cassadine murders Chloe, who has become involved with Stefan, leaving Jax heartbroken.

Jax also goes into business with Carly Corinthos , Sonny's wife, opening a nightclub in an attempt to free her from the mafia lifestyle. Despite initially disliking Skye, Jax becomes attracted to her, and she, in turn, plays the damsel in distress to lure him to her. The two make love and are both concerned when AJ becomes involved with Sonny's sister Courtney Matthews.

The two briefly split, when Jax learns that Skye had been working with Edward behind his back, but they are able to overcome this obstacle and marry. Sam and Jax search for the Dead Man's Hand. The night of his wedding to Skye, Jax is shocked to see a very much alive Brenda in his cottage. Brenda explains that she faked her death, fearing that she suffered from the same fatal mental illness as her mother and that she had been taken in by arms dealer Luis Alcazar.

When she attempts to leave Luis, he shoots Jax, leaving him paralyzed. Depressed over his condition, Jax pushes Skye away and pretends to be in love with Brenda still. Skye learns that Brenda is not dying, and when Jax discovers that she is keeping this information from Brenda, he ends their marriage.

Overjoyed, he tells Brenda the truth, and the two become engaged again. Alcoholic Skye begins drinking again and also starts an affair with Luis.

When Luis is murdered, Skye implicates Brenda and mobster Jason Morgan , forcing Brenda and Jason to marry so they cannot be forced to testify against each other. Initially found guilty, Brenda is cleared of the charges when it is revealed that Alexis killed Luis, who was responsible for the death of Kristina, in order to protect her newborn daughter.

Once her marriage to Jason is annulled, Brenda and Jax prepare to wed, though Jax leaves her at the altar when he learns that she kissed Sonny the day of their wedding. Brenda leaves town, and Skye again pursues Jax. Unable to recapture their past love, Skye begs him to impregnate her, but Jax chooses to leave town again.

Jax returns to town in pursuit of a set of five cards called the Dead Man's Hand, allegedly held by Wild Bill Hickok the night he was killed. Jax's father had them for most of his life, and believed them to be responsible for is a success.

Upon losing them, his father lost the will to live, and as Jax searched he met a grifter named Sam McCall who was also searching for the cards in Port Charles.

Initially, at odds, the two become attracted to each other while simultaneously sabotaging each other's quest for the cards. After they become lovers, Sam distracts Jax who has regained possession of the Dead Man's Hand, and Jax is unable to return the cards to his father in time to prevent his death.

Jax blames her for his father's death, though he begins to suspect he is the father of Sam's unborn child. The relationship ends when Jax learns that his enemy Sonny is actually the father.

Jax and Carly continue their relationship, and eventually, become engaged. Their wedding is delayed several times, and Jax is forced to leave town to help his wayward brother Jerry. When Sonny shoots mobster Lorenzo Alcazar, Carly marries him to avoid testifying against him. Craig, the duo has sex, which Jax learns about.

Jax resolves to fight for Carly, and though initially torn, Carly chooses a life with Jax. When they return from their honeymoon, Jax learns that Mr. Craig is actually his brother Jerry with plastic surgery. Jerry sends Jax out of town, where Jax is kidnapped by Jerry's former lover Irina. She rapes Jax twice, though he is able to escape and return to his life with Carly.

Jax begins a new business venture with fashion editor Kate Howard , who Carly immediately dislikes. The two learn that Kate is actually Connie Falconeri, Sonny's high school girlfriend, and she begins dating Sonny. Young teen Michael, fearful of the violence that surrounds his family, purchases a gun and accidentally shoots Kate.

He runs away, leaving Carly, Jax, and Sonny fearful that he has been kidnapped by Anthony Zacchara, a mafia boss newly arrived in Port Charles. Adding to their stress, Carly and Jax learn that she is pregnant.

Michael returns to town, but he and Carly are injured in an explosion caused by Diego Alcazar in retaliation for the deaths his family suffered. Ric Lansing rescues Carly, who is suffering from hypothermia. In the hospital, Anthony's daughter Claudia threatens Carly and her family in an attempt to protect her brother Johnny from Sonny and his organization. The stress surrounding her family and her injuries suffered in the explosion cause Carly to lose her baby, though she and Jax vow to keep trying.

Claudia teamed with Jerry, orders associate Ian Devlin to kill Sonny. Devlin accidentally shoots Michael, leaving the boy in a permanent coma.

On the way to install Michael at a long term care facility, Carly seduces Sonny in order to successfully manipulate him into turning over parental rights to Michael and Morgan. Kate and Jax, feeling shut out of their partner's lives, share a kiss during a romantic business trip to New York. Kate begins manipulating Jax, who leaves Carly when Kate makes it appear that she is sabotaging their business. The two reunite but split again when Jax learns that she slept with Sonny. Jax and Kate almost sleep together, but Carly interrupts them.

Though both still in love with each other, the two begin divorce proceedings and Carly decides to sell her stake in their hotel to Jax's rival Nikolas. Jax hires Kate's cousin Olivia Falconeri to work there, and she convinces Carly not to sell her shares to Nikolas.

Against the advice of their lawyers, Jax and Carly stop divorce proceedings and reconcile yet again. Sonny, who left the mob for a life with Kate, marries Claudia in order to take over her family's organization when Kate is shot again.

Carly decides to host a gala at General Hospital to raise money for research to help Michael and other children suffering brain injuries. However mid-search for Brenda he took over ELQ and fell in love with Skye… until Brenda turned up alive and complicated things. After using Elizabeth as a surrogate, Courtney became jealous of her and Courtney cheated on Jax.

After that, Jax returned a couple of times to the show until his big comeback in He returned to support Josslyn after the death of her boyfriend and Jax also offered to help Nina find her long-lost daughter.

Ingo has taken on many other ventures aside from acting such as competing on season 16 of Dancing With The Stars with dance partner Kym Johnson. He is also an entrepreneur and owns an active wear shop in Hawaii. Many fans think he may leave to continue growing his businesses. Other fans have questioned whether he may leave after receiving backlash for alleged comments about covid vaccines. He left in , but returned in and remained until In November , it was reported that the actor was no longer a part of the GH cast.

Jax arrived in Port Charles at the request of Lois Cerullo , who wanted his help to get her company back from Edward Quartermaine. Originally, Brenda was just using Jax to make Sonny Corinthos jealous, but she soon developed genuine feelings for the Aussie and they eventually tied the knot. Jax ultimately chose Brenda, but she was engaged to Sonny by that point. Unfortunately, when the mobster left her at the altar, she suffered a breakdown and Jax helped her put her life back together again.

They got engaged again, but Brenda was presumed dead when her mother drove them off a cliff. After losing his fortune, Jax started rebuilding it by gambling in Monte Carlo, which is where he met fashion designer Chloe Morgan.

As part of a scheme to keep her design business, she married Ned while Jax married his friend, Alexis Davis. Quartermaine to take over ELQ. Over time, Jax and Skye fell in love and were married. But then Brenda showed up alive and her jealous lover, Luis Alcazar, shot Jax and left him temporarily paralyzed! Brenda left town and Skye tried to rekindle things with Jax, but he also moved away.

Granted, Rademacher left General Hospital before. Soaps In Depth noted he started playing Jax in and left in He returned in and stuck around for a decade before leaving again. In Jax returned and writers incorporated him into heavy-duty storylines. If Jax is quietly leaving Port Charles soon, it sounds as if it may be an open-ended exit. If Rademacher is departing or has already wrapped up his time on General Hospital , it seems confirmation of that exit should emerge soon.

Your email address will not be published.